Fnirsi DSO-TC2, Manual

Page: 4 / 20

"Oscilloscope" mode to test the signal waveform of the circuit
�、PRODUCT INTRODUCTION
�、SAFETY INSTRUCTIONS
This product ingeniously integrates digital
oscilloscope, electronic component tester,
PWM signal generator and other functions
into one.Equipped with large-size color
dot matrix TFT display.Built-in
rechargeable lithium battery.Bring more
practical functions to users with a small
size,Also has good portability
"Mos Test" mode can test various types of transistors, and can identify device
type, pin polarity, hFE, turn-on voltage, junction capacitance; can test
capacitance, resistance, inductance components, etc
This instrument is especially suitable for fast pairing of transistors,
identification of mixed surface mount and wordless components, and
preliminary screening of small batch components
【 Mode Display 】
��
PAGE
Please read the manual carefully before use
Do not use the instrument in a flammable and explosive environment
Used batteries and discarded instruments replaced by instruments cannot be
disposed of with household waste.Please handle in accordance with relevant
national or local laws and regulations
When there is any quality problem with the instrument or when there is a
question about using the instrument,You can contact "Finiris-FNIRSI" online
customer service or the manufacturer,We will solve it for you as soon as
possible
This instrument is especially suitable for fast pairing of transistors,
identification of mixed surface mount and wordless components, and
preliminary screening of small batch components
Support online operation with computer, you can refresh the official
firmware by yourself and complete the upgrade