Installation Manual FMS winderGLIDE BKS.D.6
07.08.2017
10
Danger
The main supply terminal on the Power Supply Unit can be under a tension of 95-
264 VAC. Mortal danger! Only specially instructed and qualified personnel should
handle the cabling of this unit. In any case the main supply may only be switch on
after having properly connected the cables on the terminal.
Caution
In operation the rated current in the BKS.D.6 actuator can reach up to 10A. In
order to ensure an adequate conductor cross section it is essential to duplicate
the DC-voltage supply lines (24 VDC and GND) with wires of 0.75mm
2
or higher.
Caution
Bad earth connection may cause electric shock to persons, malfunction of the
total system or damage of the control unit! It is vital to ensure that there is a
proper and secure earth connection
.