Installation Manual FMS winderGLIDE BKS.D.6
07.08.2017
6
3
Installation
3.1
Assembly Conditions
The winderGLIDE BKS.D.6 is defined as “partly completed machinery” according to
the Directives 2006/42/EC, article 2. In order to assure a proper functionality of
the parts and guarantee the essential health and safety requirements of operators
working with it, the following conditions for the assembly of the winderGLIDE must
be met:
Caution
The winderGLIDE BKS.D.6 may not be stressed over the specification limits neither
during assembly nor operation. In particular it may not be operated outside the
specified temperature range and protection class.
Caution
The attachment points for the winderGLIDE on the machine must be properly
designed (refer to Fig. 3).
Caution
For correct installation and operation, follow the electrical wiring diagram and
instructions in this manual (refer to Fig. 5).
3.2
Mounting the winderGLIDE Type D.6
There are four mounting devices to assemble the winderGLIDE on the machine
frame
These mounting devices can be combined according to the table below to meet the
requirements of the application (see also Fig.3).
Mounting devices
Joint at the static end
Joint at the moving end
Spherical rod end
●
●
Clevis
●
●
Hinge
●
-
Flange
●
-