Operation Manual RTM MP Plus
06.03.2019
5
values are captured, conditioned and sent over a 2.4 GHz wireless link to the receiver
unit EMGZ 48R.MP. Further processing of the encoder signals takes place in the
decoding module EMGZ443R.MP Here all relevant data for the actuator drivers or the
machine control is available. A fully equipped system can handle up to 16 digital
inputs and outputs, two force measuring rollers and 2 encoder channels. The later
can e.g. be used for close loop control of drives and the control of the traverse guide
in individual bobbins.
Fig. 1: Block diagram of RTM MP system
RTM_MP_BA_Manual.ai
