Operation Manual EMGZ490A
30.08.2019
6
2
Product Description
2.1
Block Diagram EMGZ490A
Fig. 1: Block Diagram
2.2
System Description EMGZ490A
The microprocessor-controlled amplifiers of EMGZ490A series are used to amplify,
process and transmit force sensor signals to devices connected in a suitable network.
The measured force values are accessible via the PROFINET bus and on an analog
voltage output. The amplifiers are suitable for tension measurement with all FMS force
sensors. Either one or two sensors can be connected to one amplifier.
Device information, parameters or system settings can be accessed via a web browser.
Offset compensation and calibration of the system is realized through the web browser
which allows you to adjust the amplifier to the most demanding system requirements.
