FMS EDF Jet 70mm F-18F V2 PNP, Instruction Manual

Page: 11 / 44

11
EN
ESC instruction
1.Make sure your hands are dry. Cut the desired decal off the sheet using scissors.
2.Put the decal in water and leave it there for two minutes to allow the backing paper to fully absorb water.
3.Carefully slide the decal off of the backing paper and apply it to the airframe. (Optional- to help the decal adhere to the fuselage
better, apply a small amount of water to the part of the airframe where the decal is to be adhered).
4.Remove excess water by pat-drying with tissue paper, let the decal air dry fully prior to flight.
Water decal instructions.
The included decals are water decals, they do not have adhesive backings thus are not applied like usual
stickers. Do not force them off the backing paper. Please follow these instructions.
Please choose one set of decals to apply to your aircraft according to your personal preference.
Decal instruction