www.fmiproducts.com
125568-01B
18
INSTALLATION
Continued
CAUTION: After installa-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With heater set to Hi, check to
see if flames contact any log. If
so, reposition logs according to
log installation instructions in
this manual. Flames contacting
logs will create soot.
LOG PLACEMENT
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater or for MF models,
as identified for use with the heater as shown
in Figure 23.
Note: Each log includes an identifying number
cast in the log. Look at each log when plac-
ing them on the burner system to be certain
it is correct.
Note:
For additional information, go to
www.
fmiproducts.com
and click on the techni-
cal Support tab for access to log placement
videos.
Figure 23 - MF Series Burner System-
Log Compatibility Chart
INSTALLING LOGS, EMBERS AND
LAvA ROCK
WARNING: Failure to position the
parts in accordance with these diagrams
or failure to use only parts specifically
approved with this heater may result in
property damage or personal injury.
MF SERIES BURNER SYSTEM-LOG
COMPATIBILITY CHART
Find the right front log (LMF42-SC and
1.
VFGT30 inch models: D-019 or LMF48-
SC and VFGT36 inch models: D027). See
Figures 24, 24A, 24B, and 24C for refer-
ence. The log has a rectangular shape
on the bottom that fits against the lip on
the black metal base, the square grate,
and the round tube burner. Slide the log
in place as shown in Figures.
Figure 24 - Installing Right Front Log
Figure 24A - Installing Right Front Log,
Top View
Burner
Tube
Grate Finger
Right Front Log
(D-019 or D027)
Round Tube
Burner
Grate Finger
Figure 24B - Installing Right Front Log,
Top View
Burner Tube
Square Grate
Burner System Model
Refractory Concrete
Logs For Use With This
Burner System
MF42INR,MF42IPR,
MF42INV, MF42IPV
LMF42-SC
MF48INR, MF48IPR,
MF48INV, MF48IPV
LMF48-SC
