www.fmiproducts.com
125795-01B
26
OPERATION
Continued
AUTO MODE
If ''Auto'' is pressed in the initial screen, 25ºC
(77ºF) appears as the desired temperature in
the selected setting. In the bottom row,
and
appear, indicating that we can change the
desired temperature value by just pressing the
left or middle button. In auto mode the appli-
ance heats until this temperature is reached.
Pressing ''Back'' (right button), returns to the
initial screen.
The Auto mode feature is optional and can
be enabled or disabled in the configuration
menu by changing ''Thermostat'' to either
''Yes'' (enabled) or to ''No'' (disabled). Access
to the configuration menu is described in the
next section.
PROGRAMMING
PROGRAM MODE
A program mode is available if desired. This
mode allows the remote control to operate
the gas log set in either weekly or daily set-
tings. To enable the program mode access
the configuration menu.
CONFIGURATION MENU ACCESS: Press
and hold the “OFF” button
on the remote
control for 40 seconds. During this time, the
screen will go blank for a few seconds, this is
normal. See Figure 43. After 40 seconds, the
configuration menu appears (see Figure 44).
Figure 43 - OFF Button
OFF Button
Fri 20:45
Lock
Menu
On
OFF
°F
75
u
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:04
Pairing
Figure 44 - Programming
Figure 45 - Highlighting ''No''
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Gap Temp
Fri 23:27
Pairing
Programming
Configuration
Change
Back
Off
Yes
0.5°C
Thermostat
Gap Temp
Fri 23:33
Pairing
Programming
No
Arrow
Button
SELECT
Button
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Gap Temp
Fri 23:27
Pairing
Programming
Configuration
Change
Back
Off
Yes
0.5°C
Thermostat
Gap Temp
Fri 23:33
Pairing
Programming
No
Figure 46- Changing ''No'' to ''Yes''
Change
Button
Fri 21:40
Lock
Menu
On
OFF
°F
71
u
Configuration
Change
Back
Off
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 23:33
Pairing
Yes
Press the arrow button ( ) until Programming
is highlighted (see Figure 70). If Programming
has ''No'' next to it, press the ''Select'' button
to highlight ''No'' (see Figures 44 and 45).
Press ''Change'' (left button) to change Pro-
gramming from ''No'' to ''Yes'' (see Figure 72).
To return to the main screen, press the''Back''
button until you get to the main screen. The
main screen is shown in Figure 47, page 27.
The PROGRAM MODE is now enabled.
