www.fmiproducts.com
125795-01B
20
INSTALLATION
Continued
4. Find the charred log (D-020). See Figures
31, 31A, and 31B. The log has a slot in the
bottom that fits over the square grate and
rests against the burner tube as shown in
Figure 31. Place this log on the base as
shown in figures.
Figure 30B - Installing Front Left Log
Grate Finger
Log Slot
Charred
Log
Log Notch
Right Front Log
Figure 31 - Installing Charred Log
Figure 31A - Installing Charred Log Top
View
Figure 31B - Installing Charred Log Top
Side View
Square Grate
Log Notch
5. Find the middle split log (LMF36-SC and
VFGT24 inch models: D-063 or LMF42-
SC and VFGT30 inch models: D-021 or
LMF48-SC and VTGF36 inch models:
D-028). See Figures 32 and 32A. The split
side of the log faces forward. The log has
a notch that fits around the burner tube on
the right side. The left side of the burner
tube fits into the notch on the back side of
this log. The log is placed properly when
it sits parallel to the tube burner and the
square peg is pointing up. See figures
for reference.
Figure 32 - Installing Middle Split Log
(D-021)
Middle Split Log (D-063,
D-021 or D028)
Square Peg
Figure 32A - Installing Middle Split Log
Rear Top Side View
Log Notch
Burner Tube