4.
Safety instructions, transport and maintenance
________
4.1 Unpackaging
Visible damages:
When receiving the material, enter a detailed description of the break in the PDA or in the
delivery note.
General comments such as “damaged packaging” or “ damage can be seen”, etc. will not be accepted. Clear
photographs showing the damaged good and packaging must be provided.
Hidden damages:
When receiving the material and within 24 hours after reception, once the hidden damage has
been checked, photographs showing the damaged good and its corresponding packaging must be provided. The
transport agency label must be clearly visible. Photographs showing the content only and exclusively will not be accepted.
In either case, transport incidences should be reported to FM Industrial to manage the replacement of the machine.
If visible damages are detected when receiving the packaged machine, indicate “hits to the oven” at the time of the
delivery, take photos of the damages and transport agency label on the packaging. Please, contact FM Industrial
immediately.
If package is apparently in good conditions, and damages are detected when unpacking, place the original packaging
again on the machine, take pictures of the packaging and transport agency label on the packaging. Next, unpack again and
take photos of damages to the machine. Please, contact FM Industrial immediately.
4.2 Transport
Before transporting the unit to its installation site, make sure that:
-
Fits through the door
-
The floor withstands its weight
Transport should only and exclusively be carried out by mechanical means, such as a pallet jack, and always on a pallet.
8
