To activate the preheating, we must press the time key for three seconds, before starting cooking.
To deactivate the preheating, it can be done by pressing the time button for three seconds, at the moment
that we are configuring the cooking parameters, or opening and closing the door once the cycle has already begun.
•
Running a cooking cycle in manual mode
With the oven on and after setting the time and temperature values, by pressing and holding the time
button for 3 seconds, we will activate the preheating. Then press START / STOP to start the cycle.
This will
activate the elements, fan and humidifier when you press the button.
Pressing Start/Stop the cooking cycle
stops at any time and the countdown is blocked by displaying the remaining time.
If the set value was the value
INF display will remain INF. If you press the Start/Stop button cooking cycle will resume where it stopped.
Durante la cocción:
-
In the upper display (temperature display) the actual value of the oven interior temperature measured by the
probe (fixed temperature icon) will be displayed.
-
On the lower display (time values) is displayed the remaining time in hours and minutes (when the set value is
greater than 1 hour) and in minutes and seconds (when the set value is less than 60 minutes) .If the value is
replaced INF for a given time, the countdown will start from the value seted.
-
At the end of a cooking cycle (timer icon will lights) appears in the display flashing END, fans and elements are
switched off, and an alarm will sound for 40 seconds. If during these 40 seconds, you adjust a new time, the
oven will resume operation again for the extra time added with the same settings you had set before.
Otherwise pressing the Start/Stop button the alarm will stop and the display returns to the normal screen.
Note: To extend the cooking cycle, simply press on the increase button and add time you want to
extend, then click the time button and the oven will resume the march.
-
5 minutes after the end of cooking if no operation on the oven is performed, this will turn off automatically. To
reactivate simply press the button ON / OFF
6.2.2.2 Programmed operating mode
•
Storing a new program
To store a new cooking program, you must follow the next steps:
-
Press the 8 "Recipe" button that will allow you to enter the programming mode. “Menu” will flash on the
upper display, indicating that it is in Manual mode. Press the decrease or increase keys to select the program
you wish to configure and save (eg P25). To confirm you can wait 10 seconds until it stops flashing or press the
recipes button. The screen will show the values associated with the recipe, without having never used it, the
values that appear are the default values (30ºC of temperature and END in time, off in humidity and phase).
-
Modify the values of time, temperature, humidity ...
19
