-
To add more phases to the cooking cycle, press button 7 "phases" the phase icon will light up. (F1, F2 or F3).
Then modify the values of time and temperature for these new phases.
-
Finally, hold the recipes button for 4 seconds to stored it. The memorized program will be effective with a
sound and flash the program number that we have previously chosen to store the program.
Attention!!! To run properly the programmed settings, you need to memorize the recipe, otherwise theprogram
will not start properly.
If you want to know about that recipe you are working, just click on the recipes button and the program number
will apear.
To edit a program must follow the following procedure:
-
Click once on the recipes button.
-
Choose the program you want to edit.
-
Modify the values: time, temperature, humidity ...
-
Press the recipe button for 4 seconds until you hear a sound indicating that the program have been stored
properly.
•
Cooking phases of a program
When selecting the "PROGRAM" mode, the phase button allows you to see the steps that make up the program
(each program can have up to 3 stages). By clicking the button, you can switch from one phase to another (the F1,
F2 and F3 when illuminated, inconos will indicate which phase of the program you are). At any time we can modify
these parameters: time, temperature and humidity.
•
Using a stored program
To use a cooking program that is already stored is necessary to follow the next steps:
-
Press the "recipes" button and access the programming mode. The upper display will flash over the P01
recipe (7 programs icon will light).
-
With the buttons: increase or decrease choose the desired recipe and confiming the values associated with
that recipe values will appear.
-
Pressing the Start/Stop button the program will starts or stops.
20
