0
The Blow-Out-Valves of the PULSE and PSYCHO III and SPEED II have been moved from the
trailing edge closer to the leading edge, where the over-pressure is produced.
Thus the over-pressure is being decreased and the durability extremely increased.
.. fLysURfeR -LINe-systeM
The recent FLYSURFER kites have 4 flying-lines. Thus they can be flown with steering handles
or with a bar.
Conversion to handles:
In order to use handles for your kite, untie the loops at the end of the bar leader-lines
and tie them to the appropriate handle. The thinner back-lines are attached to the back end
of the handles, the black front lines to the front connection points of the handles.
All lines have to run freely! The leader-lines on the handles should be longer in the front
and shorter in the back. Check the new setup in light winds first Due to an extreme depower
the forces being effective on the handles are quite high. Therefore, when using handles,
we recommend to fly the kite with complete soft steering setup.
.. eAsy LINe CoNNeCtoRs (eLC)
The Easy Line Connectors enables a quick loosening and connection of the kite’s flying-lines,
without reducing the collapse load of the line. That way, it is much easier to put tangled up
bridle lines back in order.
Please consider that you don`t lose the ELC.
In order to connect a line put one
ELC in one noose of the two ends to
be connected. With the other loop
create a loose larks-head knot.
Now insert the ELC through the loop
of the second noose (not through the
larks-head knot itself) and tighten
the larks-head knot.