36
10.14 About Paladin EV
View system information, including product name, software version,
software release date, and hardware version.
10.12 Factory Reset
Resets the transmitter to its factory default state. This deletes all data
including all model data and system settings.
10.13 TX Firmware Update
Updates the transmitters firmware.
How to update:
1.Touch TX firmware update in the System menu.
2.Connect the transmitter to a computer using a USB wire. Then
open the flysky PL18EV update software and click update.
3.The transmitter will show a progress bar. Once the update is
complete it will restart automatically.
•
If you need to cancel the update, cancel it from the computer.
10.11 Calibration
This function is used to calibrate the multiplex sticks and knobs. The
multiplex sticks, 3 knobs and 2 shift levers can be calibrated.
Function Settings:
Click [Multiplex Stick Calibration] to access the calibration interface,
and a calibration prompt will pop up. You can operate according to the
prompt:
Click [OK] to access the next calibration after the calibration is
successful, and click on the upper right corner to return;
If calibration fails, click OK to pop up a prompt, click [Yes] to re-
calibrate, and click [No] to return automatically.