35
10.6 Backlight Brightness
Adjusts the brightness of the screens backlight. The default is 50%.
•
Turning the brightness up will use more power and as such
will lead to reduced battery life.
10.8 Auto Shutdown
Turns the transmitter off if not connected to a receiver and is not in use.
This function is enabled by default. To disable the function touch the
box and make sure there is no check in it.
Touch auto shutdown to go into the time select menu. The default is 5
min. Use the + and – keys to change the time and press the back icon to
save and exit. The time can be set up to 60 min.
10.7 Standby timeout
This function can be used to set the idle alarm time of the transmitter.
If the transmitter does not bind the receiver and the transmitter does
not operate at all, an alarm will be sent within 3 minutes by default.
Select "None" to disable this function.
10.9 Screen quick access
This function is used to set up the up, down, left and right shortcut
screen sliding functions of the main interface. Users can customize the
screen sliding interface according to their requirements.
Function Settings:
1. Access the function interface, click the corresponding function
option to select it, and select "None", that is, no shortcut operation is
set;
2. Click return to save the settings.
10.10 Switches setup
This function is used to set the gear of the shift switch SWE-SWH, and
the 2nd and 3rd gears can be selected. Click to switch gears.