background image

Fitting the Wall Bracket and Charging the Battery

F

1

2

• IMPORTANT ! Switch charger off at the wall socket be-

fore connecting or disconnecting the trimmer to the wall
bracket.  

1. It is recommended that the wall bracket 

(F2)

should be

mounted on a smooth, vertical and internal wall which is
strong enough to hold the weight of the product, in a well
ventilated area between 5°C and 25°C.

2. There are 3 holes on the wall bracket.  Position the wall

bracket with the two holes at the top. 

See Fig G.

3. Ensure that when the trimmer is attached the bottom of the

trimmer is within 4 inches (100 mm) of the ground, this will
make it easier to hang the trimmer and will also ensure that
the wall bracket is within easy reach of an electric socket to
allow the charger to be plugged in.

4. Fix wall bracket securely to the wall with the plugs and

screws provided.

5. Your cordless trimmer can now be attached to the wall

bracket for charging.

Initial Charging Procedure

1. Use the charger indoors only. 
2. Ensure the charger is not exposed to moisture.  Keep

the charger and the trimmer dry at all times.  Keep the
charger well ventilated during charging.

3. Ensure the trimmer is correctly located into the wall

bracket 

(F2)

and the charge connector 

(G1)

.

4. Plug the charger 

(F1)

into a suitable household electrical

wall socket and switch on.

5. The red indicator lamps 

(F3, F4)

glow continuously

during charging.

• The red indicator lamp on the product (F3) is a power

indicator and will continue to glow red even when the
battery is fully charged.

6. Full charge will be achieved in 24 hours after which the in-

dicator lamp on the charger 

(F4)

will turn to green.  During

charging the charger becomes warm.  This is normal and
means the charger is operating correctly.

Re-Charging Your Cordless Trimmer

1. Re-charge the battery as soon as the cutting power of

your cordless trimmer begins to die and slow down.

2. Avoid running the cordless trimmer  into "deep" discharge,

i.e. avoid flattening the battery completely.

3. Follow the procedure outlined in the 

Initial Charging

Procedure.

4. Charging the battery according to these instructions should

ensure maximum battery life.

• The charger will automatically keep the battery

topped up with charge during storage and will ensure
that the cordless trimmer is ready for use.

G

1

• The battery should be

charged for 24 hours
before use.

• Re-charge your cordless

trimmer immediately
after every use for the full
24 hour charging period.

• The cordless trimmer

can be left connected to
the charger permanently,
with the charger
switched on, without fear
of overcharging.

3

4

Auto Line Feed System

H

How the automatic line feed works (H)

1. When initially switching on the trimmer, a small length

of line is fed out.  

2. A ʻclatteringʼ noise will be heard when the nylon line hits

the line cutter.  

DO NOT BE ALARMED this is quite 

normal. 

After approximately 5 seconds the line will be cut

to the correct length and the noise will reduce as the
motor reaches full speed.

• Make sure the motor is up to full speed before

trimming or edging.

3. If the noise of the nylon line being cut cannot be heard,

more line will need to be fed out.

4. To feed more line, it is first necessary to to allow the

motor  to stop completely, then re-start, allowing the
motor to reach full speed.

5. Repeat step 4. until you hear the line hitting against the 

cutter.  (Do not repeat this procedure more than 6 times)

6. If problems are experienced with the automatic line

feed refer to Fault Finding Chart.

Summary of Contents for CONTOUR POWERPLUS CORDLESS CCT250











Reviews: