3 – Setting up ELIOS 2
ELIOS 2 USER MANUAL
Page 14 of 106
3
Setting up ELIOS 2
Insert the CAM and LOG SD cards
PLEASE ONLY USE THE PROVIDED SD CARD TYPE, AS THIS HAS
BEEN TESTED TO ENSURE IT MEETS WRITING SPEED
REQUIREMENTS.
Place the two SD cards in their corresponding slots behind the aircraft payload module. Note that the drone
will not be able to fly without a LOG SD card inserted.
Figure 3.1: SD card mounting
Clean the camera lens and the Vision sensors
BE CAREFUL NOT TO FORCE THE RED CAMERA HEAD,
MOVING IT BY HAND MAY DAMAGE THE ACTUATOR.
Using the lens cleaner provided in the tool kit, follow these steps to properly clean the 4K optical camera lens
and the Vision and distance sensors before EACH flight. It will improve the stability of the drone and improve
the image quality and increase the value of the footage obtained during an inspection.
1.
Using the brush side, remove all the dust from the lens.
2.
Using the dry cleaner side, remove all the grease and fingerprints from the optics.