8 – Advanced set-up
ELIOS 2 USER MANUAL
Page 93 of 106
–
Both GCS will emit a beep.
On the Pilot GCS:
–
The Slave RC will appear in the Slave GCS List.
On the Camera Operator GCS:
–
Tap on "Request Permission", then tap OK when a pop-up window will be displayed.
On the Pilot GCS:
–
A window will be displayed confirming the control of the camera, tap on Agree.
If a Pilot GCS is turned into a Camera Operator GCS then the drone it was previously paired to will have to be
re-paired with the new Pilot GCS.
If the Pilot (Master) GCS is paired to a new aircraft, then the Camera Operator (Slave) GCS will automatically
follow it.
