Flyabilty Elios 2 User Manual Download Page 73 | Manualshive

Page: 73 / 106

background image

6 – Application – Cockpit

ELIOS 2 USER MANUAL

Page 73 of 106

Avionics SD card missing -

cannot fly

Please insert an SD card in the Avionics SD card slot to be able to fly.

Avionics SD card full

Please empty the Avionics SD card or insert a new empty SD card in the
Avionics SD card slot to be able to fly.

Log SD card missing

Please insert an SD card in the LOG SD card slot to have your telemetry data

saved.

Log SD card full

Please empty the LOG SD card or insert a new empty SD card in the LOG

SD card slot to have your telemetry data saved.

Camera SD card missing

Please insert an SD card in the CAM SD card slot to have your video footage

saved.

Camera SD card full

Please empty the CAM SD card or insert a new empty SD card in the CAM

SD card slot to have your video footage saved.

Too strong signal - increase

distance between R/C and

drone.

The wireless transmission signal received by the GCS is too strong.

Increasing the distance between the drone and the GCS might fix the issue.

If the problem persist, restart aircraft and GCS.

Stability sensor unresponsive -
Poor ASSIST stability

expected.

Multiple stability sensors are not responding. The stability of the aircraft in
ASSIST might diminish drastically. If the issue persist after restarting the

aircraft, the sensor must be changed. Contact Flyability support to help you.

Stability sensor unresponsive -
ASSIST stability performance

diminished.

One stability sensor is not responding. The stability of the aircraft in ASSIST
might slightly diminish. If the issue persist after restarting the aircraft, the

sensor must be changed. Contact Flyability support to help you.

Stability sensors damaged -

Poor ASSIST stability

expected.

Multiple stability sensors infrared light are not working. The stability of the

aircraft in ASSIST in dark environment might diminish drastically. If the

issue persist after restarting the aircraft, the sensor must be changed.

Contact Flyability support to help you.

Stability sensors damaged -

ASSIST stability performance

diminished.

One stability sensor infrared light is not working. The stability of the aircraft

in ASSIST in dark environment might slightly diminish. If the issue persist

after restarting the aircraft, the sensor must be changed. Contact Flyability

support to help you.

Sensor unbound - Binding
procedure required

The stability sensors’ mapping is compromised most likely due to firmware
update or a replacement of sensor. Go to the maintenance panel to re-

assign the mapping.

«
...
71
72
73
74
75
...
»

Summary of Contents for Elios 2











































































































Reviews:

No comments

Related manuals for Elios 2

Brand: SYMA Pages: 3

minidrones JUMPING NIGHT

Brand: Parrot Pages: 14

Brand: Udirc Pages: 13

Brand: Parrot Pages: 42

Brand: Reely Pages: 36

Brand: Reely Pages: 36

Brand: Reely Pages: 80

Brand: MINDS-I Pages: 52

Brand: Bask Aerospace Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands