MAX OWNER’S MANUAL VER . 2.0
___________________________________________________________________________
©
Copyright di
FLY
Products
s.r.l.
Pagina
30
Reduction belt
ADJUSTING REDUCTION BELT
Attention
:
Only qualified people are to do this procedure,
consult your dealer.
The reduction belt is regulated by the manufacturer,
in case of it stretching, which is noticeable by a
whistling sound and a harsh increase in runs when
accelerating,
it should be adjusted.
This happens most likely when the engine is cold
and when there is a high level of air humidity.
Proceed as shown in
with a 6 mm and a 10 mm allen screw keys:
- loosen "A" bolt,
- regulate belt tension
with the "B" bolt
- tighten "A" bolt
Long Term Storage
Long Term Storage is defined as anything longer than 3 months. The long-term storage procedure is as
follows:
? Fuel tank drain completely.
? Start and run engine at idle until it stops from fuel starvation.
This is to remove all fuel from the carburetor and lines.
? Remove spark plug. Inject 4 teaspoons of 2-cycle oil into the spark plug hole.
Gently pull the starter rope a few times to distribute the oil, then reinstall the plug.
? Clean the prop of any dirt and/or oil.
? Clean the cage, harness, etc. so that it is free from dirt and/or oil.
? Cover the machine with a sheet or light cloth.
? Store in a clean, dry place
Summary of Contents for MAX 100
Page 1: ...MAX 100 and MAX 130...
