GMI-ROT Series - Absolute Rotary Encoder
User Manual
DANGER:
only operators who are properly trained and informed
about the risks can intervene in correspondence of the
ENCODER and only after having read this instruction
manual.
DANGER:
it is absolutely forbidden to use compressed air to clean
the surface areas of the ENCODER.
●
Periodically check the correct connection of the wiring and the connections condition.
●
Periodically check all connection cables and connectors for damage. Replace damaged
cables immediately.
●
Check compliance with the mechanical tolerances, according to the specific
configuration of the
ENCODER
, reported in the dedicated technical data sheets
attached to this document.
●
Check the tightness of all mechanical and electrical screw connections based on the
tightening torque given in Paragraph 4.2.
●
Periodically remove dust and dirt from the product.
●
Before using a detergent, check the compatibility of the detergent and the components
involved and, unless otherwise specified, do not use in general:
-
alkaline cleaners;
-
chlorine-based cleaners;
-
sulfuric acid based detergents.
5.4 Extraordinary maintenance interventions
DANGER:
the Manufacturer declines all responsibility for any
damage to property and / or persons deriving from
incorrect or incomplete maintenance.
If extraordinary maintenance is required, only experienced and qualified personnel directly
from the Manufacturer FLUX GmbH can intervene on the
ENCODER
.
FLUX GmbH - Austria
2022-04, rev00
30/34
