GMI-ROT Series - Absolute Rotary Encoder
User Manual
Indicates the possible fire risk
1.4 Warranty
1.4.1 General conditions
The manufacturer, the company FLUX GmbH, provides the ENCODER and equipment
produced by the same Manufacturer free from defects in materials and workmanship for a
period of two years unless it is otherwise writtenly agreed in a separate contract.
During the warranty period, the manufacturer undertakes to remove in the time it takes the
noticeable faults and defects in materials or workmanship in the event of a malfunction or
breakage; this provided that the
ENCODER
has been installed with the assistance of
technicians of the manufacturer and it has been used correctly in accordance with the rules
of conduct and maintenance described in this manual.
Defective parts under warranty will be repaired or replaced free of charge by the
manufacturer, if it is proven their defect at the origin.
Freight or shipping costs unless otherwise specified in the contract of sale, as well as travel
expenses relating to the intervention of technicians of the manufacturer at the headquarters
of the user are regulated in the contract of sale.
For the construction of the
ENCODER
, the manufacturer uses materials, organs and
mechanisms of the type, condition and quality, deemed at its sole discretion, appropriate to
the functions that the
ENCODER
needs to perform; in pursuing a policy of constant
development and updating of the product, the manufacturer reserves the right to modify both
the functional and aesthetic characteristics, to make any changes in the design of any
functional organ or accessory, or to suspend the manufacture and supply, without
commitment to inform and without incurring in any obligation.
In addition, the company FLUX GmbH reserves the right to make any structural or functional
changes, in addition to changing the supply of spare parts and accessories without having to
notify anyone and for any reason whatsoever.
1.4.2 Parts excluded from the warranty
The warranty does not cover wear parts and all utensils and any consumables supplied by
the manufacturer together with the
ENCODER
.
1.4.3 Operations involving the invalidation of the warranty
Any attempt to disassemble, modify or tamper any component of the
ENCODER
by the user
or by unauthorized personnel will result in invalidation of the warranty and will hold the
manufacturer harmless from any liability for damages to persons or property caused by such
tampering.
The manufacturer is not responsible and the warranty is void in the following cases:
FLUX GmbH - Austria
2022-04, rev00
9/34
