GMI-ROT Series - Absolute Rotary Encoder
User Manual
supplies concerning the mechanical system controlled by the
ENCODER
) and
that no one can inadvertently reactivate them (use of padlocks, appropriate
signs and consolidated work procedures);
-
check that any residual energies have been discharged before carrying out
the interventions, including residual energies concerning the mechanical
system controlled by the
ENCODER
;
-
wait for all surfaces to cool down.
●
Use auxiliary tools (manual, electric, hydraulic or pneumatic) only if the operators are
skilled and formally trained to use it. Always read and follow the tool manufacturer’s
instructions before use.
●
Do not use, for any reason, petrol, solvents or inflammable fluids for cleaning, but use
commercial and approved cleaners non-combustible and non-toxic.
●
Do not make changes, transformations or applications to the
ENCODER
that could
affect its safety, without first obtaining written authorization from the Manufacturer.
●
Do not hit the
ENCODER
with equipment or anything else.
●
Do not tamper the
ENCODER
components.
4. Installation and commissioning
To perform this task, the following Individual Protection Devices are required:
During this task there are the following residual risks, as described in full in Chapter 3:
FLUX GmbH - Austria
2022-04, rev00
22/34
