Fluke TiX520, User Manual

Page: 35 / 56

Expert Series Thermal Imager
Menus
25
To enable or disable the Center Box feature:
1. Go to Measurement > Center Box .
2. Push

/

to highlight ON or OFF .
3. Push

to set the new value.
To set the size of the Center Box when enabled:
1. Push

/

to highlight Set Size .
2. Push

to go to the adjustment screen.
3. Push

to increase the size of the Center Box .
4. Push

to reduce the size of the Center Box .
5. When satisfied with the size of the Center Box , push:
•

to set the change and exit the menus.
•

to set the change and go back to the
previous menu.
•

to cancel the change and go back to the live
view.
Markers
Up to three adjustable, fixed-temperature spot markers are
available on the display. You can use these markers to
highlight a region before you save the image. The marker
selection is set as All Off, One Marker, Two Markers, or
Three Markers.
To set a Marker:
1. Go
to Measurement > Markers .
2. Push the

/

to highlight the function between All
OFF , One Marker , Two Markers , and Three
Markers .
3. Push

to set the marker option and go to the
“Move Marker” display. You will see the Move Marker
icon and the labels on the function buttons change to
Done , Next , and Cancel .
To change the Marker position on the display:
1. Push
 
 
to move the Marker location on the
image.
2. Push

to highlight the next marker. Do Step 1
again.
3. Do Step 2 for a third marker.
4. Push

when done.