Fluke TiX520, User Manual

Page: 18 / 56

TiX520, TiX560
Users Manual
8
Note
Make sure that the Imager is near room
temperature before you connect it to the charger.
See the charging temperature specification. Do
not charge in hot or cold areas. When you charge
the battery in extreme temperatures, battery
capacity may be decreased.

shows in the lower left-hand corner of the display
when the Imager is connected to ac power and the battery
is removed. When the Imager’s power is off and the ac
power adapter is connected,

flashes in the center of
the display to show that the battery charge is in process.
Keep the Imager attached to the charger until the

icon
shows a full charge. If you remove the Imager from the
charger before a full charge shows, it may have a reduced
run-time.
Note
When the battery is connected to ac power or the
unit is in video mode, the Sleep Mode/Auto Off
feature is disabled automatically.
Optional 12 V Vehicle Charger
1. Connect the 12 V adapter into the 12 V accessory
socket of the vehicle.
2. Connect the output to the ac power socket of the
Imager.
3. Charge until the indicator until the

icon shows a
full charge on the screen.
4. Disconnect the 12 V adapter and Imager when battery
is fully charged.

Caution
To prevent damage to the Imager, remove it
from the 12 V vehicle charger before you start
or jump start the vehicle.