Fluke TiX520 User Manual Download

Page: 14 / 56

TiX520, TiX560

Users Manual

Table 1 is a list of symbols used on the Imager and in
this manual.

Table 1. Symbols

Symbol Description Symbol Description



Important information. See manual.



Warning. Laser.



Connected to ac power. Battery removed.



Battery status. Battery charging when animated.



On/Off symbol



Conforms to requirements of European Union

and European Free Trade Association.



Conforms to relevant Australian standards.



Conforms to relevant North American Safety

Standards.



Conforms to relevant South Korean EMC

standards.

Japan Quality Association



This Product contains a lithium-ion battery. Do not mix with the solid waste stream. Spent batteries should be

disposed of by a qualified recycler or hazardous materials handler per local regulations. Contact your

authorized Fluke Service Center for recycling information.



This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates

that you must not discard this electrical/electronic product in domestic household waste. Product Category:

With reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9

“Monitoring and Control Instrumentation” product. Do not dispose of this product as unsorted municipal waste.

Go to Fluke's website for recycling information.

Summary of Contents for TiX520

























































Search results

Summary of Contents for TiX520

Reviews:

Related manuals for TiX520

Brands by name

Popular brands

Fluke TiX520, User Manual

Search results

Summary of Contents for TiX520

Reviews:

Related manuals for TiX520

Brands by name

Popular brands