background image

Thermal Imager Camera 

Safety Instructions 

 

1. Safety Instructions 

This  document  contains  important  information,  which  should  be  kept  at  all  times  with  the 

instrument  during  its  operational  life.  Other  users  of  this  instrument  should  be  given  these 

instructions  with the instrument. Eventual updates to this information must be  added to  the 

original document. The instrument can only be operated by trained personnel in accordance 

with these instructions and local safety regulations. 

Acceptable Operation 

This  instrument  is  intended  only  for  the  measurement  of  temperature.  The  instrument  is 

appropriate for continuous use. The instrument operates reliably in demanding conditions, such 

as in high environmental temperatures, as long as the documented technical specifications for 

all  instrument  components  are  adhered  to.  Compliance  with  the  operating  instructions  is 

necessary to ensure the expected results. 

Unacceptable Operation 

The instrument should not be used for medical diagnosis. 

Replacement Parts and Accessories 

Use  only  original  parts  and  accessories  approved  by  the  manufacturer.  The  use  of  other 

products can compromise the operation safety and functionality of the instrument. 

Instrument Disposal 

 

Disposal  of  old  instruments  should  be  handled  according  to  professional  and 

environmental regulations as electronic waste. 

Operating Instructions 

The  following  symbols  are  used  to  highlight  essential  safety  information  in  the  operation 

instructions: 

 

Helpful information regarding the optimal use of the instrument. 

 

 

Warnings concerning operation to avoid instrument damage and personal injury. 

 

 
 
Pay attention to the following safety instructions: 

 

Use in 115/230 V~ electrical systems can result in electrical hazards and personal 

injury, if not properly protected. All instrument parts supplied by electricity must be 

covered to prevent physical contact and other hazards always. 

 

 

Summary of Contents for ThermoView Series


















































Reviews: