ThermoView® Series
Users Manual
14
7. Accessories
A full range of accessories for various applications and industrial environments are available.
Accessories include items, that may be ordered at any time and added on-site.
7.1. Available electrical accessories for ThermoView
®
cameras
Code
Description
Electrical Accessories
A-CB-LT-PS-07
Power supply cable, 80°C (176°F) max., 7.5 m (25 ft.) long
A-CB-LT-PS-25
Power supply cable, 80°C (176°F) max., 25 m (80 ft.) long
A-CB-LT-PS-50
Power supply cable, 80°C (176°F) max., 50 m (160 ft.) long
A-CB-LT-M12-W08-07
Multi-conductor 8 pin cable with M12 connector for ethernet communication, 7.5 m
(25 ft.) long
A-CB-LT-M12-W08-25
Multi-conductor 8 pin cable with M12 connector for ethernet communication, 25 m
(80 ft.) long
A-CB-LT-M12-W08-50
Multi-conductor 8 pin cable with M12 connector for ethernet communication, 50 m
(160 ft.) long
A-TV-POE1
PoE Injector provides power and acts as a single Ethernet hub (115/230 VAC input)
A-TV-POE2
PoE Injector (Industrial) provides power and acts as a single Ethernet hub
(115/230 VAC input)
A-PS-DIN-24V
24 VDC 1.2 A industrial power supply, DIN rail mount
A-CB-LT-RJ45-25
Standard Ethernet Cable 25 m (82 ft) with both side RJ45 connectors
A-CON-FO-RJ45
FiberOptic/RJ45 Converter
A-CB-FO-150
Fiber Optic Cable 150 m (492 ft)
A-CB-FO-300
Fiber Optic Cable 300 m (984 ft)
A-CON-SW
4-Port Gigabit Ethernet Switch
A-CB-LT-RJ45-03
Ethernet cable (short) for Junction Box
A-TV-JB
Junction Box
A-CON-16DI
Digital In (16 each) See Note (750-1506)
A-CON-16DO
Digital Out (16 each) See Note (750-1504)
A-CON-2AOC0
Analog Out Current (2 each), 0 - 20 mA See Note (750-563 preset to 0-20 mA)
A-CON-2AOC4
Analog Out Current (2 each), 4 - 20 mA See Note (750-563 preset to 4-20 mA)
A-CON-2R
Relay (2 each) (750-513)
A-CON-2A-ISO
Passive Current Isolator (847-452)
A-CON-BASICKIT
Fieldbus Basic Kit
(750-352, 750-602, 750-600)
7.1.1. Power supply cable, 80°C max., 7.5m (25ft.), (A-CB-LT-PS-07)
The power supply cable comes with a three-socket female M16 connector, assigned to the
cameras rear three pin male M16 connector. The corresponding end of the power supply cable
is carried out as a pig tail, to connect to an external power supply device. The standard cable
is about 5 mm (0.2 in) in outer diameter and is 7.5 m (25 ft) long. The cable withstands ambient
temperatures up to 80°C (176°F). All three sockets of the M16 connector are wired by a 3-wire
supply cable. Just the socket 1 (brown wire = GND) and 3 (white wire = +VDC) of the M16
connector must be supplied by external VDC, if no PoE (Power over Ethernet) is used. Please
leave the socket 2 (black wire) at the counter end unwired.
