2-1
Chapter 2
Using the Medical Functions
mAs Measurements
The mAs function allows you to make mAs (milliampere x
seconds) cursor measurements on input A or input B. You
can do this on live waveforms, frozen waveforms (HOLD),
recorded waveforms, and on saved waveforms.
To perform mAs measurements on input A, do the
following:
1
Connect the current shunt CS190-1R to input A
using the BNC cable (see Figure 2-1)
2
Connect the current shunt resistor CS 190-1R to
the current source using the BNC to banana
adapter (see Figure 2-1)
ST8722
CS190-1R
RED
BLACK
50 BNC CABLE
Ω
I in
I out
Figure 2-1. mAs measurement
