Fluke RUSKA 7252, User Manual

Page: 64 / 128

RUSKA 7252
Users Manual
4-24
6. Using the numeric keypad, enter the values for Start , Stop , Tolerance , Dwell
time , Max time , number of pressure Points up , and number of pressure Points
down , pressing ENTER after each value. The rotary knob may be used to skip fields.
7. Press Program [ F1 ]. The program will be generated and the display will show the
first step.
8. Press the Name [ F6 ] key to edit the name of the program. See next section in this
Chapter, Changing the Name of a Program, for creating a user-defined program name.
Changing the Name of a Program
1. The name of an existing program is changed from the Program Menu . From the
Main Menu (press Previous until the Main Menu appears), press Menu [ F6 ] |
Program [ F4 ]. In addition to changing the name of an existing program, a new
program may be initiated by selecting “new” and performing the same steps as
outlined to change the name of a program.
2. Use the rotary knob to highlight the current name. (For a new program name, select
“new.”)
3. Press Edit [ F4 ]. The program editing screen will appear, displaying the first step.
4. Press Name [ F6 ].
glb33.bmp
Figure 4-21. Channel A: Menu | Program | Edit | Name - Menu
5. Use the < [ F4 ] and > [ F5 ] keys to highlight a character.
6. Turn the rotary knob to select the character from the character set.
7. To correct a mistake, press Clear [ F4 ] and return to step 5.
8. Repeat steps 5 and 6 until the name is complete.
9. Press Done [ F6 ] to store the contents of the scratchpad as the new name of the
program.