Hydraulic Comparison Test Pump
Ancillary Equipment
11
Ancillary Equipment
Angle Adapter, P5543
To calibrate gauges with the pressure connection on the rear (e.g. panel-mount gauges) in
their correct position, an angle adapter should be used. The angle adapter fits directly
onto the test station, converting it through 90 degrees, allowing the standard adapters to
be used.
gjn022.bmp
Figure 5. Angle Adapter
Pointer Remover/Punch, P5551
To remove and refit the pointer of a pressure gauge, use the pointer remover/punch
instrument. This tool has a spring-loaded plunger to quickly and consistently refit the
pointer.
gjn023.bmp
Figure 6. Pointer Remover/Punch
