Fluke NORMA 6003, User Manual, Page: 57 / 98

Power Analyzer
Operation
51
Item Description
j
Horizontal Axis Scale
Horizontal axis (the time axis) scale, the length of time represented by each grid
Horizontal axis supports manual zoom. See
Zoom
and Shift the Waveform for details.
k
Trigger Source and Trigger Mode
Current trigger setting, showing the current trigger source and trigger mode. See
Trigger Setup for details.
l
Soft Keys
A
( Configure ): Global configuration, see Global Configuration .
B
( Signal ): Select the waveform displayed on the screen, see
Select the
Waveform to Display
.
C
( Trigger ): Trigger settings, see Trigger Setup .
D
( Cursor ): Turn cursor on/off and set cursor mode, see
Measure with The
Cursor
.
E
( Zoom/Shift : Zoom and shift waveform, see
Zoom
and Shift the Waveform
.
Select the Waveform to Display
Up to 4 waveforms can be displayed simultaneously on the screen, and the user can select 1 to 4
items from all available items for display.
Enter the Signal Menu:
•
From the main screen of Scope select
B
( Signal ).
The “ Signal ” menu lists all currently available parameters, including voltage and current for
example..The specific parameters depend on the current system configuration. See
Set the Wiring
Selection
.
Select the Waveform to Display:
1. In the “
Signal
” menu, use the arrow (
M N O P
) keys to move the cursor over the corresponding
item.
2. Push
]
( Select ), the selection box of the current item turns yellow and a black “×” symbol is
appears, indicating the selection. To remove a selection, push
]
( Select ) again, the selection
box will be cleared.
When a parameter is selected or cleared, the state is reflected in the waveform screen.
3. Repeat step
1
to
2
, up to 4 parameters can be selected.
4. Push
Q
( Back ) to go back to the main screen of Scope.
Note
If 4 signals are selected, all not selected signals are grayed out. When you push the
arrow (
M N O P
) keys, the cursor can only move among the selected 4 signals. To
select a different signal, you must clear 1 of the 4 signals and then add a new one.