Fluke NORMA 6003, User Manual, Page: 39 / 98

Power Analyzer
Operation
33
Define hvf/hcv Calculation
hvf/hcv is a numerical measurement item used for measuring rotating motors according to IEC60034.
It is necessary to configure the type of motor and rated voltage/current according to the actual test
requirements.
1. From the Main screen of any view mode select
A
(Configure) >
E
(
Formula
) >
C
( hvf/hcf ).
2. The interface of calculation formula definition is as shown in
Figure 13
.
In the hvf/hcv calculation page, the upper part is used to calculate hvf, and the lower part is used
to calculate hcf.
Figure 13. hvf/hcf Calculation Formula
3. Use the arrow (
M N O P
) keys to move the cursor to “Motor Type”, select Non 3-phase or 3-
phase, k≠3n and then push
]
( Select ).
4. Use the arrow (
M N O P
) keys to move the cursor to “
U
N
” (rated voltage)
，
select
Use Measured
or Specify and then push
]
( Select ) on the control panel.
If Use Measured is selected, the measured voltage fundamental amplitude is used as the rated
voltage; if Specify is selected, you can specify the rated voltage. Move the cursor to the