17
Parts and Controls
Front Panel
Parts and Controls
7
The user should become familiar with the bath and its parts:
Front Panel
7.1
SET
UP
DOWN
EXIT
7102
MICRO-BATH –5°C to 125°C
7102 Front Panel
Figure 1
Controller Display
– The digital display is an important part of the temperature
controller because it not only displays set and actual temperatures but also dis plays
various calibrator functions, settings, and constants. The display shows temperatures
in units according to the selected scale °C or °F.
Controller Keypad
– The four button keypad allows easy setting of the set-point
temperature. The control buttons (SET, DOWN, UP, and EXIT) are used to set the
calibrator temperature set-point, access and set other operating parameters, and access
and set calibration parameters.
Setting the control temperature is done directly in degrees of the current scale. It can
be set to one-hundredth of a degree Celsius or Fahrenheit.
The functions of the buttons are as follows:
SET
– Used to display the next parameter in the menu and to store parameters to the
displayed value.
DOWN
– Used to decrement the displayed value of parameters.
UP
– Used to increment the displayed value.
EXIT
– Used to exit a function. Any changes made to the displayed value are ignored.
Holding the EXIT button for approximately 0.5 seconds exits back to the main display.
Back Panel
7.2
Power Cord
– Underneath the calibrator is the removable power cord inlet that plugs
into an IEC grounded socket.
