background image

Security 

Operational Security 

IEEE 802.1X option for network authentication.  

Note:

 

LinkRunner Duo supports the following 802.1X encryption key sizes: 

512, 768, 1024, 1280, 1536, 1792, and 2048 bits.

 

Environment Specifications 

Operating Temperature 

+10 to +40 degrees C 

Storage Temperature 

-20 to +60 degrees C 

Operating Humidity 

Lithium Ion battery charging 

temperature 

95% relative humidity (non-condensing) 

0° to +30°degrees C (+32° to +86° F) 

Vibration Requirements 

Meets requirements for MIL-PRF-28800F for Class 2 random vibration 

Connection To Public Telephone 

Network 

Should never be connected to the public telephone network 

 

Note:

 This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in 
a residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at your own expense. 

Summary of Contents for LinkRunner Duo

















Reviews: