Reports Edit/Erase
Allows you to edit report names and erase reports. Each report contains a summary of
the Home screen, PING screen, and LLDP, EDP, CDP screen. The reports must be
viewed on the LinkRunner Connect PC application.
Selecting the report name/number to edit:
When
is highlighted, press the
selection button (center). Use the up/down arrow keys to choose the report number
and the selection button to select it. Notice at the bottom of the display, the report
name changes as you scroll thru the report numbers. By default the names are
Report01 – Report08.
Editing the report name:
Using the down arrow key, move down to the report name.
Press the selection button (center). To edit the report name, move right to each
character (by using the right arrow key) and use the up/down arrow keys to select
each character value. Keep doing this until the report name is entered, then press the
selection button.
Erasing a report:
Using the down arrow key, move down to erase the report. Press the
selection button (center) and the report is erased. Erased or empty reports have no
lines in the symbol.
Selecting the IP number/name to edit:
When
is highlighted, press the selection
button (center). Use the up/down arrow keys to choose the IP number and the
selection button to select it. Notice at the bottom of the display, the IP name changes
as you scroll thru the 10 IP numbers. By default the names are
IP1 – IP10.
Editing the IP address to PING:
Then, using the down arrow key, move down to the IP
address. Press the selection button (center). To enter an IP address, move right to each
digit (by using the right arrow key) and use the up/down arrow keys to select each
digit value. Keep doing this until the IP address is entered, then press the selection
button to save.
Editing the IP name:
Press the down arrow key to move the cursor to the IP name
field. Press the selection button (center). To enter an IP name, move right to each
character (by using the right arrow key) and use the up/down arrow keys to select
each character. Keep doing this until the IP name is entered and then press the
selection button. To exit out of the PING IP address configuration, press the left arrow
key.
