Fluke LinkRunner Duo Quick Reference Manual Download Page 14

Page: 14 / 16

Firmware update

Allows you to download the latest LinkRunner Duo firmware through the LinkRunner

Connect PC application. Firmware updates can be downloaded from

www.flukenetworks.com/linkrunnerduo.

Navigate to the LinkRunner Duo product page

and follow the links for downloads and updates.
Press the right arrow to update. Use the LinkRunner Connect PC application to

download the update files.

Note:

If the batteries are too low during the firmware update, you will get an error

message. Replace the batteries. If using the optional Lithium Ion battery pack,
recharge or connect to AC power.

Exits out of Configuration menu and back to the Home screen.

Other Features

Restore Factory Defaults:

Press the left and right arrow keys while powering up the unit.

Accessories

Buy LinkRunner Duo accessories, options, or other network test products by contacting a Fluke Networks

representative or send e-mail to:

[email protected]

. For more information go to

www.flukenetworks.com/linkrunnerduo

Accessories Part

No.

IntelliTone Pro Toner Probe (receiver)

MT-8200-63A

Wireview

Office Locator (ID #1)

WIREVIEW 1

Wireview

Office Locator (IDs # 2-6)

WIREVIEW 2-6

Clip Set

CLIP-SET

RJ-45 Coupler

CIQ-RJA

Lithium ion battery pack and AC adapter

LRPRO-LION

Contacting Fluke Networks Sales, Service, and Support Centers

To order accessories or get the location of the nearest Fluke Networks distributor or service center, visit the Fluke

Networks contact website at

www.flukenetworks.com/contact

Send email to

[email protected]

. For

operator assistance in the USA, call

1-800-28-FLUKE (1-800-283-5853). You can also visit the Fluke Networks

Knowledge Base

http://kb.flukenetworks.com

Summary of Contents for LinkRunner Duo

















Search results

Summary of Contents for LinkRunner Duo

Reviews:

Related manuals for LinkRunner Duo

Brands by name

Popular brands

Fluke LinkRunner Duo, Quick Reference Manual

Search results

Summary of Contents for LinkRunner Duo

Reviews:

Related manuals for LinkRunner Duo

Brands by name

Popular brands