9150
User's Guide
8-14
Press “SET” to choose to set the sample period. The current sample period value
is displayed.
=
Current sample period (seconds)
Adjust the value with “UP” or “DOWN” and then use “SET” to set the sample rate
to the displayed value.
=
New sample period
8.11.3 Duplex Mode
The next parameter is the duplex mode. The duplex mode may be set to full
duplex or half duplex. With full duplex any commands received by the calibrator
via the serial interface are immediately echoed or transmitted back to the device
of origin. With half duplex the commands are executed but not echoed. The
duplex mode parameter is indicated by,
Serial duplex mode parameter
Press “SET” to access the mode setting
=
Current duplex mode setting
The mode may be changed using “UP” or DOWN” and pressing “SET”.
=
New duplex mode setting
8.11.4 Linefeed
The final parameter in the serial interface menu is the linefeed mode. This
parameter enables (on) or disables (off) transmission of a linefeed character (LF,
ASCII 10) after transmission of any carriage-return. The linefeed parameter is
indicated by,
Serial linefeed parameter
Press “SET” to access the linefeed parameter.
=
Current linefeed setting
The mode may be changed using “UP” or “DOWN” and pressing “SET”.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
