GB-152-AF™ OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company
This equipment described in this manual is designed and manufactured for the intended purpose of
generating high pressure gas. Certain precautions need to be followed during installation and operation of this
device. Reading and understanding this material is essential to the safe and correct operation of the unit.
Pressurized equipment is potentially dangerous. The equipment described in this manual generates and
controls very high gas pressures. It should not be operated by anyone who has not become thoroughly familiar
with this manual. Additional training in general and pressure specific safety procedures will help assure
protection from harm or damage to personnel or property. Responsibility for the proper and safe operation of
this instrument rests with the user.
High pressure liquids and gases are potentially hazardous. Energy stored in these liquids and gases
can be released unexpectedly and with extreme force. High pressure systems should be assembled and
operated only by personnel who have been instructed in proper safety practices.
This instrument is not to be operated in any other manner than that specified by the manufacturer.
© 2007
DH Instruments, a Fluke Company
All rights reserved.
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the express written permission of
DH Instruments
4765
East Beautiful Lane Phoenix AZ 85044-5318 USA.
DH Instruments
makes every effort to ensure the accuracy and quality of its published materials; however, no warranty, expressed
or implied, is provided.
DH Instruments
disclaims any responsibility or liability for any direct or indirect damages resulting from the
use of the information in this manual or products described in it. Mention of any product or brand does not constitute an
endorsement by
DH Instruments
of that product or brand. This manual was originally composed in English and was subsequently
translated into other languages. The fidelity of subsequent translations cannot be guaranteed. In case of conflict between the
English version and another language version, the English version takes precedence.
Products described in this manual are manufactured under international patents and one or more of the following U.S. patents:
5,142,483; 5,257,640; 5,331,838; 5,445,035. Other U.S. and international patents pending.
DH Instruments
,
DH
,
DHI
, PGC, PPC, PPC3, RPM4, GPC1 and CalTool are trademarks, registered and otherwise.
Swagelok
is a registered trademark of the Swagelok Company.
Teflon
is a registered trademark of the 3M Corporation.
Document No. 550137b-01
070628
Printed in the USA
