Fluke db PRUFTECHNIK SHAFTALIGN touch, Manual

Page: 15 / 127

Sensor LEDs
Activity
Laser beam status and charging
LED Laser on / Bluetooth com-
munication LED
Switch on Lights up red for 1 second, then red
or green (depending on the battery
capacity) for another second, then
continues to blink red
Lights up blue for 1 second then con-
tinues to blink red (indicating laser
emission)
Laser beam
status Blinks red when laser is OFF
Blinks orange when laser is in END
position
Blinks green when laser centered or
in ‘laser OK’ position When Bluetooth communication is
established blinks blue once then red
three times (indicating laser emis-
sion). This sequence repeats itself
Charging Blinks fast green during fast charge
(0% - 90%)
Blinks slowly green when charge is
> 90%
Lights steady green when charge is
100%
Charging the sensor
The sensor may be charged using mains supply or a PC.
Note
Charging the sensor using mains supply is faster than when charging through a PC.
14 Version:2.3
On-board help