Using the Logger with
Insight Software
See your dedicated system manual for full details on:
x
Choosing appropriate thermocouple probes.
x
Conducting a temperature-profile run of your process.
Before the logger is used for the first time, you must:
1.
Install
Insight software.
2. Establish
communication
between the logger and the computer/software.
Before each profile run, you will:
3.
Reset
the logger to prepare it to receive fresh data.
After the profile run is complete, you will then:
4.
Download
the data from the logger.
These stages are described below.
Installing/Removing Insight
Datapaq Insight used with the XDL12 logger requires the following minimum
computer specification
.
x
1 GHz processor.
x
2 Gb RAM.
x
Monitor resolution 1024
u
768, 256 colors.
x
100 Mb free hard disk space.
x
DVD drive.
x
1 free USB port.
x
Microsoft Windows™ XP, Vista, 7, 8 or above.
x
Microsoft Internet Explorer 4 or above.
The XDL12 logger operates only with Datapaq Insight v.6.0 and above.
DATAPAQ XDL12
Using Insight Software
19
