Fluke CertiFiber Pro, User Manual, Page: 17 / 150

Chapter 1: Get Acquainted

Safety Information
7

Safety Information
Table 1 shows the international electrical symbols used on the
tester or in this manual.
Symbols for certifications and compliance
are on page 131.

: This key turns the tester on and off.

Warning

To prevent possible fire, electric shock, or personal
injury:

Use only AC adapters approved by Fluke Networks
for use with the tester to supply power to the tester
and charge the battery.

Do not put the battery pack in a fire or an
environment with temperatures more than 140 °F
(60 °C).

Do not use the tester in damp or wet environments.

Do not short-circuit or disassemble the battery pack.

Do not use the tester if it is damaged. Inspect the
tester before use.

Do not open the case; no user-serviceable parts are
inside.

Do not modify the tester.
Table 1. International Electrical Symbols

Warning: Risk of fire, electric shock, or personal injury.
 Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.
 Warning: Class 1 (OUTPUT port) and Class 2 (VFL port) lasers. Risk of
eye damage from hazardous radiation.
 Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.