Fluke CertiFiber Pro, User Manual, Page: 115 / 150

Chapter 7: Test Results
How to Replace a Saved Result that Failed
105
3 Tap TEST or press

, then save the result.
How to Replace a Saved Result that Failed
To use the same test settings that were used for the saved result
1 On the home screen, tap the RESULTS icon.
2 On the RESULTS screen, tap a result that failed.
3 Tap TEST AGAIN .
4 When the test is completed, and if Auto Save is on, the tester
asks you if you want to overwrite the results. Tap Yes .
If Auto Save is off, tap FIX LATER (if the test failed) or SAVE (if
the test passed) to save the result.
To replace a result with a result that uses different test settings
1 Turn off Auto Save .
2 Make sure that the home screen shows the project that
contains the result you want to replace.
3 Select the necessary test settings.
4 Do the test, tap FIX LATER (if the test failed) or SAVE (if the
test passed), then enter the ID of the saved result.
5 The tester asks you if you want to overwrite the results. Tap
Yes .