Chapter 2: Certify Twisted Pair Cabling
Twisted Pair Autotest Results
43
The name of the outlet configuration used for the test. The
outlet configuration is a setting on the
TEST SETUP
screen.
The wire map of the cabling. The main tester is at the left side
of the wire map.
Tap
to see information about wire map faults. If
shows, tap it to see a message about the results, such as
Bad
patch cord at remote
.
The overall result for the Autotest. If the result shows an
asterisk, See “PASS*/FAIL* Results” on page 41.
The result for the wire map test:
The wire map does not agree with the outlet configuration
selected for the test.
The wire map agrees with the outlet configuration selected
for the test.
When more than one button shows at the bottom of the
screen, the tester highlights one in yellow to recommend
which one to tap. See “Buttons to Do Tests and Save Results”
on page 20.
