manualshive.com logo in svg

Fluke CableAnalyzer DSX-602, User Manual

Share
Download
Fluke CableAnalyzer DSX-602 User Manual Download Page 108

DSX-602 CableAnalyzer

Users Manual

100

Extend the Life of the Battery

W

Warning

X

To prevent possible fire, electric shock, or personal 
injury, read the warnings about the rechargeable 
battery under “Warning

X

” on page 4.

Do not frequently let the battery discharge completely. 

Do not keep the battery at temperatures below -20 

o

C

 

(-4 

o

F)

 

or above +50 

o

C (+122 

o

F) for periods longer than one week.

Before you put a battery into storage, charge it to 
approximately 50 % of full charge.

Store the Tester

Before you store a tester or an extra battery for a long period, 
charge the battery to approximately 50 % of full charge. The 
discharge rate of the battery is 5 % to 10 % each month. 
Check the battery every 4 months and charge it if necessary.

Keep a battery attached to the tester during storage. If you 
remove the battery for more than approximately 24 hours, 
the tester will not keep the correct time and date. 

Storage temperature: -22 °F to +140 °F (-30 °C to +60 °C)

Remove the Battery

Figure 33 shows how to remove the battery.

Notes

If you remove the battery and do not connect the 
AC adapter, the clock keeps the current date and 
time for a minimum of 24 hours.
The screw does not come out of the battery door.

Summary of Contents for CableAnalyzer DSX-602















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands