700G Series
Users Manual
2
Safety Information
A
Warning
identifies conditions and procedures that are dangerous to the user. A
Caution
identifies
conditions and procedures that can cause damage to the Product or the equipment under test.
W
Warning
To prevent possible fire, explosion, or personal injury:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Do not alter the Product and use only as specified, or the protection supplied by the
Product can be compromised.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product if it is altered or damaged.
•
Disable the Product if it is damaged.
•
Avoid any action that can generate an electrostatic charge. Electrostatic discharge is an
explosion hazard.
•
Clean the Product only with a damp cloth.
•
Do not rub the non-metallic parts of the enclosure (display overlay or holster) with a dry
cloth. This action can create an electrostatic discharge.
•
Only assemble and operate high-pressure systems if you know the correct safety
procedures. High-pressure liquids and gases are hazardous and the energy from them
can be released without warning.
•
Do not use the RS-232 interface in hazardous areas. The RS-232 interface port must be
sealed when used in a hazardous area.
•
Substitution of components can impair suitability for hazardous locations.
•
If the Product is exposed to overpressure or sudden physical shock (such as a drop),
examine the Product for damage that can cause a safety concern. If necessary, return
the Product to Fluke for evaluation.
•
The battery door must be closed and locked before you operate the Product.
•
Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
•
Repair the Product before use if the battery leaks.
•
Be sure that the battery polarity is correct to prevent battery leakage.
Summary of Contents for 700G0
Page 4: ...700G Series Users Manual ii ...
Page 18: ...700G Series Users Manual 14 ...