Fluke 700G0, User Manual

Page: 12 / 18

700G Series
Users Manual
8
To set a factor:
1. Go to Supervisory mode.
2. Push

until SET FACTR shows on the display.
3. Push

/

to select a factor.
4. Push

to set the option and go back to the previous function, or push

to set the option and
go back to live view.
Maintenance
Clean the Product
Clean the Product with a soft cloth dampened with water or water and weak soap.
W
Caution
To prevent possible damage to the Product, do not use solvents or abrasive cleansers.
W
Caution
For safe operation and maintenance of the product:
•
Repair the Product before use if the battery leaks.
•
Be sure that the battery polarity is correct to prevent battery leakage.
•
Remove the batteries if the Product is not used for an extended period of time, or if
stored in temperatures above 50 °C. If the batteries are not removed, battery leakage can
damage the Product.
•
Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
•
Have an approved technician repair the Product.
Batteries
When the battery voltage is low,

shows on the top left of the display.
W
Warning
To prevent possible fire, explosion, or personal injury:
•
Batteries must only be changed in an area known to be non-hazardous. Explosion
hazard.
•
Use replacement batteries of the same type. The replacement batteries must be the same
design, chemistry, age, and manufacturer.