Precision Infrared Calibrator
Quick Start
11
Back Panel
Table
shows the back panel.
Table 4. Back Panel
The
fan
is located in the center of the back of the Product. Do not obstruct the
airflow of the fan. Leave at least 6 inches of air flow around the Product.
The power supply cord attaches to the
power-entry module
. Plug the cord into an
ac mains supply appropriate for the voltage displayed on the power entry module
and as specified in
Specifications and Environmental Conditions
.
The power switch is located on the power-entry module of the Product.
The Product fuses are located inside the power-entry module of the Product. If
necessary, fuses must be replaced according to
Specifications and Environmental
.
The
serial (RS-232) interface
can be used to transmit measurements and control
the operation of the Product.
