Digital Multimeter
Safety Information
3
•
Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
•
Do not use and disable the Product if it is damaged.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product in damp or wet environments.
•
Keep fingers behind the finger guards on the probes.
•
Measure for hazardous voltage without the Low-Pass Filter.
W
Caution
To prevent possible damage to the Meter or to the equipment
under test, follow these guidelines:
•
Disconnect circuit power and discharge all high-voltage
capacitors before you do resistance, continuity, diodes, or
capacitance tests.
•
Use the correct terminals, function, and range for all
measurements.
•
Before you measure current, check the fuses of the Meter.
(See “Fuse Test”.)