Fluke Calibration RUSKA 7615, User Manual

Page: 45 / 64

Remote Operation
Device Messages
5
5-5
:MODE MEASure¦CONTrol¦VENT sets mode
:MODE? returns mode string
PROGram
:CATalog?
returns list of defined programs
[SELected]
:DEFine <program block> Define program
press1, toler1, dwell1, max1, press2,
toler2,
:DEFine? read program definition
:DELete
[:SELected]
deletes current program
:ALL deletes all programs
:NAME <program name> select current program
:STATe RUN|PAUSe|STOP|CONTinue set program state
:STATe? read program state
:CONFigure
:RECall
restore saved configuration
:SAVE save current configuration
SENSE
[:PRESSure]
[:RESolution]
<number> set pressure display resolution
:AUTO <boolean>|ONCE return to default resolution
:MODE? returns ABSOLUTE or TARE
:RANGE
[:UPPer]<number> set triple range (full scale in
current units)
:LOWer?
returns 0
:REFerence
[:HEIGht]
<number> set head height
:SGRavity <numbers> set specific gravity
[SOURCE]
[:PRESsure]
[:LEVel]
[:IMMediate]
[:AMPLitude]
<number> sets pressure setpoint
[:AMPLitude]? read pressure setpoint
:MODE FIXed|LIST set source parameter set
:TOLerance <number> specifies output tolerance
:SLEW <number> set slew rate
:CONTrol <number> set control band
:MODE CYCLE|FAST|NORMal set control mode
:LIST
:PRESsure <number> [,<number>] set list of pressure values
:POINts? returns number of points defined
:DWELl <number> [,<number>] specifies dwell times
:POINts? returns number of dwell times
:TOLerance <number> [,<number>] specifies tolerances
:POINts? returns number of tolerances
:DIRection UP|DOWN direction to go through list
:COUNt <number> number of times to go through list
STATus
:OPERation
[:EVENT]?
read/clear operation event register
:CONDition? read operation condition register
:ENABle <number> set operation enable mask
:QUEStionable
[:EVENT]? read/clear questionable event
register
:CONDition? read questionable condition register
:ENABle <number> set questionable enable mask
:PRESet reset condition flags
SYSTem
:DATE <year>,<month>,<day> set system date
:ERRor? returns <error#,”descr;info”>
or 0,”No Error”
:KLOCk ON|OFF|1|0 lock keyboard
:TIME <hour>,<minute>,<second> set system time
:VERSion? returns 1991.0
:LANGuage “6000”|”SCPI” set interface protocol to 6000 or
SCPI
:PRESet reset system
TEST
:ELECtronic?
perform electronic self-test
UNIT